MULTI-APRO Asynchronous Programmer

The Ultimate Programming Solution For Development & Production

[Description] [Features] [Specification]

Product Features

• Modular-design programming unit with up to 8 connections.
• Unique HSP adapters and Socket Boards design for unparalleled high speed programming, writing Intel 28F160B3 in 10 seconds.
• Comprehensive package and device supports on each programming module.
• Ultimate choice for both laboratory and production floor
• Local stand-alone and remote computer control operations.
• High speed RS-232C serial port interface up to 115200 bps.
• High speed bi-directional parallel port interface.
• Local operation configurable with standard PCMCIA Flash memory card.
• Synchronous and asynchronous operations supported.
• Free Software upgrade.

Back To Top

Product Description

Time is money, and think of how much you can save when your programming operations have a zero wait time. On the asynchronous Multi-Apro, each programming module is an independent Universal system and the programming is executed concurrently on each module. Therefore, as soon as a device is inserted in socket #1, the programming is underway. By the time the nth socket is filled, socket #1 programming is finished and ready for the next programming cycle. The proprietary HSP (High Speed Programming) technology, implemented by the unique HSP adapters and Socket Boards for various device packages, distinguishes Multi-APRO in the speed of programming high density FLASH EEPROM.

The Multi-APRO sets a new standard for a production programmer in terms of system configuration and programming performance. It allows you to program different devices on different sockets, and generates a “Device Set “ for the assembly line. You can add or remove the modules from the system without affecting the programming operation. For system service or calibration, you can alternate sending back the modules without interrupting the production. Both Windows and DOS software are available for the PC remote control operation. A Job software can save the data file with the programming parameters on the Flash Memory card for error-free local operations. The advanced HSP technology eliminates almost all the software overhead and programs devices in high speed. High current resolution and accurate current sensing capability allow for the correct programming of the most demanding Anti-Fuse devices. The programmable system Vcc, down to 1.8 Volt, supports the next generation Green devices with no hardware constraints.

Back To Top

Product Specifications

Back To Top

Hardware specification

• Dedicated CPU in both programming module and controller.
• Embedded switching power supplies in both module and controller.
• RAM Standard 32 Mbits in module, expandable up to 128 Mbits.
• High speed RS-232C serial port interface up to 115200 bps.
• High speed bi-directional parallel interface.
• Local PCMCIA standard Flash memory system card.
• Proprietary HSP (High Speed programming) adapter and socket boards for fastest high density flash memory programming.

Software System

• DOS and Windows interface software

Device Support

• The stand-alone programming module is by itself a high-end universal programmer supporting virtually all types of memory, microcontrollers and PLD logic devices.

Package Support

• Widest collection of adapters and converters to support various device packages: DIP, PLCC, SOIC, PSOP, VSOP, uBGA, etc.
• Socket boards for HSP adapters covers PLCC32, PSOP44, TSOP32, TSOP40, TSOP48, TSOP56, VSOP32, VSOP40, uBGA40 and uBGA48 packages.

Functional Specifications

• Stand-alone and remote PC control operations
• Read, Program, Verify, Margin Verify, Illegal Bit Check, Erase, Secure.
• Multitasking operation management environment
• Synchronous and asynchronous operations supported for two or more programming modules in connection
• File download and upload
• EPROM Auto ID, device auto-sensing and device insertion check
• Configurable PCMCIA flash memory card, system card or job card
• Powerful memory-editing functions
• Set/Split programming
• Serial code programming

Data File Formats

• Binary, Standard HEX, ASCII-SPACE-HEX, ASCII-OCTAL, Motorola S ( S1, S2, S3 ), Intel MCS 86 HEX, Tektronix HEX, Extended Tektronix HEX, TI HEX, Xilinx HEX, Altera POF, Altera Jam, Standard JEDEC. Auto-Identifiable.

Standard Package

• Stand-alone programming module with 40 pin DIP adapter
• (will become optional) Controller with 16 Mbits PCMCIA system card
• System software diskette
• All necessary cabling
• User manual
• ESD wrist strap

Electrical Requirements

• Operating Voltage: 90 to 265 VAC
• Frequency Range: 47 to 63 Hz
• Power Consumption: 60 Watt (max.)

Physical Specifications

• Dimensions:
  Controller: 15.5 (W) X 34 (D) X 11.5.0 (H) cm.
  Module: 15.5 (W) X 34.0 (D) X 11.5 (H) cm.

• Weight:
  Controller: 3.0 Kg.
  Module: 3.5 Kg (net) (Typical adapter: 0.5 Kg)

Back To Top